|
If you are considering holding the key fob to your head or chin, you may get a slightly better signal reception. Nonetheless, checking your keyless car entry remote for battery replacement is always the best way to deal with the problem of poor receptivity and performance. Most of us feel like kicking our keyless car entry remote or the entire system out of our sight when either of them fails to deliver quality performance. The minute you ask your acquaintances – or anybody who knows something about fixing those non-performing gadgets – to suggest ways to improve the signal range, they would come up with their suggestions. While some would ask you to hold the remote to your chin or head with your mouth slightly open to boost the remote signal range, others may advise you to follow some simple DIY tricks or hacks to resolve the issue. However, only you can decide if you are techie enough to carry out those hacks or tricks of your own. Even then, while worrying too much about the poor signal receptivity of our car’s keyless entry system and questioning its existence, we fail to find the actual cause behind the issue of non-performance of your keyless car entry remote – maybe, it needs a battery replacement. Don’t be surprised; well, such a thing happens when we rule out the most basic reasons without due consideration. Here is a tutorial that guides you through various steps of replacing your keyless car remote battery. Check the battery type First thing that you need to be sure about is the battery type. Most keyless entry for cars remotes have the specific battery type legibly written on their cover. However, if your remote has none of such info written on the outside, what you need to do is open the cover and remove the old battery to find the battery type written somewhere inside it. Removal of battery cover You will find a circle in the back of your keyless car remote. Find a coin, insert it into the slot and turn it clockwise to get the cover off. Now, you will see the old battery in there that requires replacement. Put the new battery in Before you actually remove the old battery of keyless entry for cars and put the new battery in, see how the old one is placed there. Now again, if you are lucky enough, you will easily find a + sign to save you the trouble of locating the right side. Once you insert the new battery in, your car keyless entry remote will start operating as it was doing before. Unlocking complex car keyless entry remote High-end car manufacturers usually provide somewhat complicated auto remotes to their customers as they focus on providing unparalleled security. Contrary to their intention to offer foolproof security, the same security measure becomes a nuisance when one thinks of replacing the battery himself or herself. For replacing the battery of such high-end car’s keyless entry remote, first slide the locking mechanism to one side and pull the key out of it. Now, slide the second locking mechanism. Push the latch aside, and detach the top and bottom parts of the remote. When you see the slot for inserting the battery, insert the new one in carefully. The author of this article is associated with Auto Transponder and recommends their car key services to people.
Related Articles -
keyless entry for cars, auto remotes,
| 
