|
Granite countertops can make your kitchen look polished and put-together, but installing them can be a difficult and expensive process. If you don't think you have the skills necessary to install the counters as a do-it-yourself project, you may want to consider calling a professional to do the job. If you decide to tackle the job on your own, the first thing you need to do is carefully measure the counter. Next, use Kraft paper or another lightweight paper to create a template of the counter. Carefully mark out the space necessary for the sink and other openings. Once you've done that, decide how much of an edge you will want on the counter and add that measurement to your template. This will ensure that the counter you order will have the proper measurements. Next, choose the material you want and order it according to the measurements of your template. Once the material arrives, you will need to make sure the cabinets can support its weight before you can continue with the granite countertop installation. You can do this by adding a layer of plywood to the counter. You should cut the plywood using the same dimensions as the top of the counter and attach it to the cabinets using screws or a nail gun. Next, carefully place the stone on top of the plywood. Using a marker or pencil, draw a line designating the hole for the sink and any other openings. Next, carefully remove the stone and stand it upright against a wall so it doesn't break. Using a drill, make a pilot hole in the middle of the marked sink opening and use a jigsaw to cut out the hole. You can cut as much as one-eighth of an inch outside of the line if you aren't able to cut precisely along the line. The next step of the granite countertop installation is to install the sink. Once you've done this, you should get the stone top and place it on top of the plywood. Carefully make adjustments so that it's aligned properly with the sink and edges of the cabinets. Be sure to push all the seams together as tightly as possible. You will need to glue the stone down to complete the granite countertop installation process. First, make sure the stone is level. Once you've done that, raise it one more time and apply silicone sealer to the edges of the plywood. You should space circular dollops of the sealer every 6 to 12 inches along the edges of the plywood. You'll also need to put sealer around the sink. Once you've done this, fill the seams around the sink by applying a mixture of hardener and resin. Use a mixture similar in color to the counter for best results. Want professional granite countertop installation? Grandville, MI area residents, click here: http://www.premiergranitetops.com.
Related Articles -
granite, countertop, installation, grandville, mi,
|
