The tile in our homes left a maddening cleaning problem in it's wake - dirty, discolored grout lines that are labor intensive to clean.You need tips on cleaning grout and how to clean grout if your tiles look beautiful but the appearance of the grout is making it look bad. Kitchens and bathrooms look lovely with fresh new tile. However, for them to remain that way you must follow some very good tips on cleaning grout. There are many different types of tiles such as granite, ceramic, marble and slate. With the vast array of materials, patterns and styles, there are tiles available to fit everyone's taste. No matter what tile type you choose, particularly ceramic or slate - it is extremely hard-wearing and almost indestructible. What ends up taking away from the tiles beauty and makes it look old, is cracked or stained grout.The good news is that by following a few tips on cleaning grout, you can maintain your tile and have it remain looking wonderful.Because grout is porous, it can become stained and ruin the look or your countertop, flooring or shower. To restore or retain the grouts original appearance requires occasional tile and grout cleaning. Even grout, treated with special sealers, requires care and another sealing application from time to time. Be sure to cover any areas with a drop cloth, such as carpets, wear rubber gloves and open a window when cleaning your grout. Be sure that no matter what type of grout cleaner you use, it is safe for your type of tile and grout. Grout is usually a mixture of cement, sand and water that they use to seal joints between tiles.Three of the main varieties of grout include: Flooring grout Cement or epoxy-based tiling grout Resin grout Make the cleaning less labor intensive and grout lines look like new again with these easy ways to clean grout. Here are five tips on grout cleaning that will make your work a little easier. If you have a very large area of grout to clean or it is extremely dirty, your best solution may be hiring a professional with proper equipment. A new method they use is steam-cleaning grout using high-pressure vapor. Not only does it deep clean the grout and remove grease, stains and dirt but also removes mildew, mold and sanitizes. Combine baking soda with a small amount of white vinegar and use a small brush or old toothbrush to scrub your grout, and then rinse with warm water. Use a silicon-based grout sealer and apply one or two coats to dry grout. Apply this to all the grout lines to protect them from water and stain damage. Spray shaving cream on stained grout, leave it on for a few minutes and scrub with a small brush. For stubborn stains on light colored grout, make a paste of baking soda and straight peroxide. When the bubbling stops, apply this mixture to the stain and leave it on for approximately ten minutes. Scrub with a small brush and rinse. By following a few easy tips on cleaning grout and spending a little time cleaning it, your tile will look as wonderful as the day you had the tiles installed. More of this cleaning tips and guide see the right professional Tile and Grout Cleaning Auckland for more info
Related Articles -
Tile and grout cleaning, tile and grout cleaner Auckland, tile and grout cleaner northshore, tile and grout cleaner west Auckland.,
|