|
cartridge heater manufacturers in Bangalore, India. Apart from this they also have Infrared, Mica Band, Ceramic, Coil haters.">There are several reasons why industrial heaters might be installed. Besides their basic function of heating up a room or for that matter any other area in the building, they can also be utilized for heating material containers or for conduction of heat current. Plus, they are very useful for bending equipments (of course, via heating) so as to leave them with the desired proportions required to fulfill operational needs. These units can be purchased in several forms. You can either avail ceramic fiber heaters for transmitting radiant heat or else the ones which can heat through conductivity. Then there are the space heaters which can heat a specific area. Or else, you can also settle for (the one which we are concerned with, at present) - the cartridge heaters. These are the units which are placed in already heated substances. What are Cartridge heaters? The high watt and low watt cartridge heaters come with a resistance wire placed inside a straight and unbending tube. Often thermocouples are put inside these heating units—especially in the ones meant for internal heating. This is done carefully so as to render the control on the melt of the temperature. Please remember that you should put the thermocouple near the tip of the cartridge. If you are using the unit for external heating you should put it at the place where it is capable of measuring the temperature of the steel near the flow channel and not near the heater. How they work For internal heating the cartridge is inserted in contact with the melt inside the channel. The length and diameter of the cartridge thus chosen are considerably governed by the dimensions of the nozzle. The cartridge heaters are duly designed so as to endure contact with plastic. If you are aiming for heated manifolds with indirectly heated nozzles or drops you have to pop the cartridge in through the drilled holes on both the sides of the runners. There should be a distance of about a diameter between the runner and the cartridge. It is very important for the drilled hole to comply with the diameter of the heating unit. Or else, there are serious chances of overheating. What you should take care of.. Please remember that purchasing cartridge heaters is an important decision and should be implemented only after you have conducted substantial research on the background of the dealers and manufacturers of cartridge heaters. Electron System is one of the renowned cartridge heater manufacturers in Bangalore, India. Apart from this they also have Infrared, Mica Band, Ceramic, Coil haters.
Related Articles -
cartridge heaters, heaters for industries,
| 
