Don’t take the process of installing a cork tile to be very complicated and different from others. It requires a lot of care and skill but it’s not very much different from how other types are installed. Very few differences will be visible and all the installation information you need will be discussed in this article. Adhesives are some of the recommended materials to be used for installing these tiles but you don’t have to use any that you come across. There are specific ones that are commended and water-based adhesives are the best. They are proven beyond doubt to be effective as well as reliable which will end up in a stronger bond being created. As is the norm, the manufacturer offers an installation manual for these tiles which you should look up to. It is your onus to ensure each and every step is followed as enumerated in the manual without ignoring anything. The manual has the required amount of adhesives that will be applied and the step-by-step guide on what to start with and where to end. It can be confusing on the best way to apply the adhesive but you will get all that information from the manual. It will instruct you on whether to use a brush, towel or any other suitable material. Just make sure you don’t do anything outside the manual because it might end up giving something totally different. Before you permanently install your cork tile, it is advisable that you carry out a trial with low visibility to determine its suitability. It is from that you can be able to make a decision on whether to proceed with the actual installation or reconsider your options. When satisfied, take the bold step and begin the installation process. The whole process will begin with having the adhesive applied on the floor where the tiles will be laid. Handle the adhesive with a lot of care to avoid spilling out to unwanted sections of the floor which can leave very ugly marks. After application, leave it for around 30 minutes to one hour which is enough time to dry. Where you feel like the cork tile will not bond properly, add another coat of the adhesive as well as in cases where the cement seems porous. When placing the tile on the adhesive, the bottom part should be dusted otherwise it will not bond with the adhesive well. Dust is an inhibiting factor and should not be allowed to come in between. Debris can make the floor look uneven and should be cleared as well before the tiles are laid down. Make sure the tiles are placed as per the guidelines such that no gaps are left or the tiles are too much squeezed together. Resource Box You must be well informed on how a http://icorkfloor.com/cork-wall-tiles.html cork tile is installed before embarking on such a noble task. It will be frustrating once you have messed up with your tiles installation due to lack of information and that is something you can avoid easily. It has to be adhered to mostly when installing basement cork flooring.
Related Articles -
Cork tile, Basement cork flooring,
|