How to Set the Color to Yellow on a Coemar ParLite LED |
The Coemar Par Lite LED projectors use red, green and blue LED lights to create a wide range of colors. The projector is fully programmable to cycle through a number of different color settings or can be set manually to project just one color. Just like the RGB color scheme used by computer monitors and televisions, white is created by turning on all three colors at full intensity.
Instructions 1 Disconnect the power before opening the projector.
2 Remove the four screws that hold the rear panel to the projector. Set the panel and the screws aside.
3.Locate the dip-switch panel. It has 16 switches. The switches labeled 2 through 256 control the color mixture and intensity.
4 Set dip switches 1, 2 and 4 to the "On" position to set the red LEDs at 100 percent.
5 Set dip switches 8, 16 and 32 to the "On" position to set the green LEDs at 100 percent.
6 Set the dip switches 64, 128 and 256 to the "Off" position to prevent any mixing of blue light.
7 Replace the rear panel.
Dreambox DM7080HD dm7080HD dm8000HD led wall washer light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
Related Articles -
led, wall, washer, light,