|
If you are aware of what you are doing, cleaning your Brother Laser Printer isn’t that challenging. However, before you venture into a cleaning project, here is what you need to know – • There are a number of models of laser printers that come in varied shapes and sizes.
• Each one of them makes use of toner that while cleaning is at risk of entering your skin and lungs
• Since these particles are extremely fine, they take over 15 minutes to settle after they are airborne.
• In office areas where fans and HVAC systems are constantly on, this may take hours.
• Since the fuser roller compartment gets extremely hot, it is another area that you want to take care of while cleaning. Make sure that your printer remains switched off for at least one hour before you start cleaning.
• If you are not confident about pursuing the cleaning yourself, it is ideal to get professional help from your Brother printer troubleshooting team. Cleaning Equipment to Invest in • Toner Vacuum Your typical household vacuum cleaner doesn’t come with the right filters that help in trapping the toner particles. Invest in a specific machine which is portable, easy to use and powerful enough. • Toner Cloth This disposable cloth helps attract and trap toner particles. By slowly stretching the slides, the cloth gets activated and it helps pick up particles that the vacuum leaves behind. • A Safety Mask Respiratory tract irritation can take place if you are exposed to large amounts of toner particles. A mask will help you prevent inhalation of these dust particles. In addition to this, also invest in cotton swabs, isopropyl alcohol, a soft bristle paint brush, and latex gloves. When cleaning the printer, make sure you remove the cartridge and the toner bottle. Take care of the fine wires that are often exposed. Breaking these can prove to be an expensive mistake.
Related Articles -
Brother Printer help desk, Brother Laser Printer support number, Support for Brother Printer problems, Brother Laser Printer issues,
|
