|
This article is the best for you if you happen to find that cork flooring is the most perfect flooring for your home and you now think of installing it. The article mainly dwells on the overview of how to do cork flooring files installation and at the end of it; you will have a chance to get more links that have more guidelines for advanced installation. Steps of installing cork flooring tiles Step 1 Before you even begin the installation process, always make sure that your sub-floor is ready to accept the tiles. This can be achieved by removing the old floor if there was one to the sub-floor and then scrap any old glue that was initially used as you make sure it is clean and dry. Make sure that you have leveled up your soundproofing floors by using fillers in low areas and sanding down high areas. This will guarantee you of a proper and perfect installation when it is done perfectly. Step 2 After making sure that the first step is perfectly done, apply a primer to the sub-floor. This will make it easier for you to apply adhesive and most importantly gives your floor a strong bond. Apply a thin primer over the installation area entirely and you can also use a paint roller. Always make sure that you check the manufacture’s specifications regarding the primer for their product. Step 3 This step involves the actual laying of the soundproofing floors. Before even laying the cork tiles, you need to decide on the pattern of the layouts. If you do not have a pattern yet, you can Google and check for the available patterns that will suit you. Following instructions on how to use and the right amount of adhesive to be used is always the trick. Sometimes, the cork flooring manufacture may require you to use an adhesive of a specific type. Step 4 This step involves you going over your freshly laid floor from different direction using a drum roller. You then have to wait for a maximum of 48 hours before you put anything on that cork wall tiles. It is also crucial that you confirm with the manufacture and adhesive specifications if you should wait 24 to 48 hours before using a drum roller as this always varies for some reason. It is advisable that you put a sealant coat, but since it is polyurethane, it negates a bit of its green properties, though this step always depends on the installer or the manufacturer. Keep it in mind that doing this will prolong your cork flooring life if you properly maintain it though your floor can still go without it as it is not high traffic area. If you happen to learn a little more about cork floors or even you want more advanced guides about their installation, then the links below will greatly help you. Keep it in mind that this project takes some time and patience thus could use a friend. This is because you will have a lot of regrets if you rush through it. It is my hope that you really enjoyed this article of do-it-yourself believing that your installation was a success. BIO: You must have realized that it is always harder to install https://icorkfloor.com/cork-wall-tiles-installation.html cork wall tiles than cork floating floors as they have different installation methods. Installation of soundproofing floors is usually harder and this makes it require a little more time and this always makes it fun.
Related Articles -
cork wall tiles, soundproofing floors,
| 
