|
Rig wash reduces torque and drag. It can be used in all drilling areas of water base drilling fluids. It can be used in all drilling areas of water base drilling fluids. It works as an oil emulsifier in fresh water and sea water mud. It is suggested to use full Strength to remove thick Deposits of Oil and Grease and to wash Rig Floor .It may also be diluted with kerosene to clean tanks and mechanical Parts..The Rig Wash combines with the drilling fluid; it breaks down the cuttings, oil and bacteria in the water. It will not let the oil portion recoat the drill pipe, rig floor and work areas. It is highly effective in both fresh water and sea water. Rig wash is an industrial strength product that is effective in all types of water conditions. Rig Wash is safe, non-toxic, biodegradable heavy-duty cleaner with variable results dilution rates that meet your everyday rig washing needs. A biodegradable rig wash degreaser is certainly a must for any oil company looking for a way to get rid of oil and grease without contaminating the environment. The rig cleaning crews must always take precautions when using any cleaning supplies, even having a non regulated rig wash degreaser they can use to pressure wash a rig clean, while being safer than a more caustic and regulated product, protective masks and goggles must still be used. Rig Wash is a concentrated, nonylphenol free, blend formulated with the environment in mind. Rig Wash and pressure is for all temperature has a powerful and fast wetting and penetrating action which enable it to remove heavy deposits of oil, dirt and grease from concrete or metal surface, vessel bilge decks, engine room and drill floor etc. The rig cleaning crews must always take precautions when using any cleaning supplies even having a non regulated rig wash degreaser they can use to pressure wash a rig clean while being. Cleaning a rig of any oils, dirt, mud and sludge also can keep your existing paint job intact which ultimately can protect the rig structure from rust and extends the life and usability of the rig. Rig Wash removes stubborn and hard to remove oil and soil in no time. Fast acting and can be used with fresh or salt water. The pressure vessel is filled with the appropriate washing mixture. The mixture is then pressurized with compressed air. The pressurization process agitates the fluid providing additional mixing. The fluid delivery hose is attached to the turbine washing ring. The engine is then either a) Cold Crank Washed or b) Hot Washed. In either case the fluid is forced through the turbine blades under the control of the operator. The fluid is agitated and filtered, whilst being delivered to the engine ensuring a high mix quality. With rigs with two pressure vessels, one vessel is used for the washing solution mixture and the other for a rinse using demineralised water. Rig wash is a special aqueous blend of anionic and non ionic surfactant equally effective regardless of makeup water, whether it is fresh or saturated salt water. It is an excellent emsulsifier and may be used at any point in the drilling operation to improve emulsification and reduce torque and drag. It is highly effective in both fresh water and sea water. It is suggested to use full Strength to remove thick Deposits of Oil and Grease and to wash Rig Floor. Rig-Wash to the part to be clean by means of sprays or brushes or immerse the article in a bath of cleaning liquid. After a short soaking period, it can be rinsed off with water. Parts on which rust formation must be avoided should not be rinsed down with water. It may be diluted up to 1:10 ratio for general Purpose Cleaning. It may also be diluted with kerosene to clean tanks and mechanical Parts. Wash your oil well free of oil and grease. This may be the best drilling rig cleaner you will ever try. Vikas,for information on Hand Cleaner,Air Cooler CleanerRig Wash,Tank CleanerCarbon Remover,Degreaser,Oil Spill Dispersant,Electric contact cleaner,Detergent and Metal Bright.Please visit our site:http://rxmarine.com/
Related Articles -
Rig Wash, Tank Cleaner,
|
