|
|
|
Implementing the 510 (K) correctly in compliance with the latest proposed FDA changes by John Robinson
|
|
|
Implementing the 510 (K) correctly in compliance with the latest proposed FDA changes by JOHN ROBINSON
|
|
Article Posted: 09/16/2016 |
Article Views: 367 |
Articles Written: 270 - MORE ARTICLES FROM THIS AUTHOR |
Word Count: 565 |
Article Votes: 0 |
|
Implementing the 510 (K) correctly in compliance with the latest proposed FDA changes |
|
|
|
Education,Health,Food & Beverages
|
|
A 510(K) is a premarket submission made to FDA to demonstrate that a device to be marketed is at least as safe and effective, meaning that which is substantially equivalent, to a legally marketed device that is not subject to premarket approval (PMA). There are three types of Premarket Notification 510(K)’s that may be submitted to FDA: Traditional, Special, and Abbreviated. Product modifications that could significantly affect safety and effectiveness are subject to 510(K) submission requirements under 21 CFR 807 as well as design control requirements under the Quality System (QS) regulation. Under the QS regulation, all Class II and III devices and certain Class I devices are required to be designed in conformance with 21 CFR 820.30 Design Controls. The FDA provides guidance on these. Needed: A thorough understanding of these aspects and the FDA’s latest proposed changes In accordance with the concern evinced by many industry groups and associations, the FDA introduced as many as 60 proposals in August 2010, into the manner in which the 510 (K) process could be expedited. This was done with the intention of accelerating the speed at which newly approved medical devices could be made available to patients across the country. However, with the number of proposals being too many and their scope being too wide; the medical industry suggested that the FDA select for implementation only those proposals that enjoyed the broad consensus of the stakeholders, such as increased reviewer training, development of specific and relevant guidance documents, and enhancements or improvements to the de novo review pathway, among other suggestions. An upcoming seminar by GlobalCompliancePanel, a leading provider of professional trainings for the regulatory compliance industries, will clarify on these areas taken up for immediate change by the FDA and place them in the right context. It will address key resources when making critical decisions. This seminar will offer important insights into the core areas of premarket notifications, as well as the Design Control requirements under QS regulations and Design Controls. To enroll for this seminar, just log on to http://www.globalcompliancepanel.com/control/globalseminars/~product_id=900525SEMINAR?bullet-proof-510(k)-Seattle-WA The Director at this seminar is David R. Dills, a senior Regulatory Affairs & Compliance Consultant. David provides regulatory, compliance and quality consultative services for medical device and pharmaceutical/combination manufacturers, and also has an accomplished record with more than 24 years of experience with Class I/II/III medical devices, In Vitro diagnostics, and pharmaceuticals in the areas of Regulatory Affairs, Compliance and Quality Systems. An understanding of the core elements of the PMA At this seminar, David will help participants understand how medical device manufacturers can locate a "predicate" device and go through the content and format of the 510(K), and offer an understanding of the De Novo process and the expectations for possibly marketing a low risk device, and the potential impact of FDA's proposed changes to the 510(K) process and why manufacturers need to pay attention to these. He will also offer understanding of all the crucial aspects of the PMA, such as the differences between the Traditional, Special and Abbreviated submissions, an understanding of the Substantial Equivalence and how it is applied, who is required to submit the application to FDA, where to submit the 510(K) and what to expect with the review and approval process, when a device company requires this process and when it does not, the applicable exemptions to the submission process and special considerations, and so on.
Related Articles -
FDA, Quality System, medical devices, Regulatory Affairs, 510(K),
|
Rate This Article |
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
Reader Opinions |
|
|
|
|
|
|
|
|
Author Login |
|
|
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|