|
When it is time to clean non-slip tile flooring, the task can be daunting because it is hard to clean those types of surfaces thoroughly. Below is a step-by-step guide to cleaning non-slip tile flooring You will first need to gather the following supplies: • Long-handled floor scrub brush • Short-bristled brush • Bar Keepers Friend cleaner • Water • Broom • Towels Steps for Cleaning Tiles: 1. Clear the floor of all rugs, furniture, and other obstructions. It is recommended that you clean in sections for larger floor areas, but for smaller floor areas, it may be easier to clean the whole floor at once. 2. Sweep the floor to remove any loose dirt of debris. 3. Dampen the floor with a small amount of water and move it around with the long brush. Be sure that there is enough water to wet the surface, without pouring an extreme amount of water over it. 4. Sprinkle a layer of Bar Keepers Friend cleaner over the wet floor. This will make cleanup easier and will keep the cleaner from setting into the texture of the tile. 5. Brush the surface lightly to ensure that the cleaner is worked into the wet floor. Do not scrub the floor yet. 6. Allow the cleaner to sit on the floor for about 5-10 minutes, but do not let the floor dry. 7. Scrub the floor with a long brush, but for stubborn hard-to-reach areas, the short brush may be more effective. Add water as necessary. 8. For stubborn spots, add more Bar Keepers Friend cleaner to the wet floor. 9. Once the floor is clean, towel-dry it. If there is residue left on the floor, add more water and scrub the area gently to work the cleaner out of the tile, and then towel-dry. It should be noted that although Bar Keepers Friend has been declared safe for use on floor tiles and grout, it’s always a good idea to spot-test new products before using them. If you decide to hire a professional to do a thorough cleaning of your anti-slip tile flooring, they will have professional equipment and better quality cleaner. They will clean the floor and then use a sealant to seal the floor after it has been thoroughly cleaned. This will help to keep the surface looking like new, keep the base of the tile from collecting more debris, and help keep the anti-slip properties of the tile intact. Most professional cleaners will charge by the square foot area of the floor. Their use of high-quality products can help keep the tiles cleaner longer. Are you looking for more information on ceramic tile anti slip? Visit http://www.cleansurfacepros.com/ now!
Related Articles -
ceramic, tile, anti, slip,
|
