|
As homeowners , we all know that it comes a moment when we need repair all the dents, scratches and other cracks in drywall. Sometimes, because of the lack of knowledge, we pay a lot of expense on handymen and other qualified workers, without even knowing that any beginner can get the project done with little effort, in just several hours. Nevertheless, while fixing dents and scratches can be repaired by anyone, the real skills are needed to repair hole larger than 4' in drywall, which are quite common to all households. We all know how expensive drywall repairs can be, so we strongly recommend you to learn the basic skills and to buy the basic tools for the job. In this manner, you will be prepared for any situation and save a significant amount of money. From our experience, fixing drywall is easy, but you should pay attention to several aspects, like the materials you use and how to smooth the transition between the wall and the patch. However, in order to obtain a professional output, as to cannot tell where the repair is, you have to pay attention to a few aspects, which we will be referring in this tutorial. Also, purchase yourself a 6' palette knife, a drywall saw and a professional utility knife. You will see in just a few moments where we are going to use them and mainly how. First of all, you should examine the damaged area and understand how serious the situation actually is. If the dent is less deeper than half an inch or less larger than 3', you could solve it easily without fitting a piece of drywall. Make sure you clean all the debris and the gypsum that is loose. Moreover sand around the holes, otherwise the mud isn't going to bond to the surface. Mix a few drywall compound and apply it to the damaged are using the 6' knife. Afterwards, embed the drywall paper in the compound and pay attention to any pockets of air. leave the mud to set up out a little, before applying the second layer of compound. Let it harden overnight and smooth the damaged area with attention, making sure there is a gradual transition between the area and the the patched area. Nonetheless, if the damaged area is large, you should cut it out with a drywall saw, making it rectangle. Attach a piece of 1x2 slat on the back of the drywall and insert screws. Cut out a good patch of drywall and lock it into place. Parch the joints with paper and apply a couple of coats of mud. Smooth the wall thoroughly, apply the primer and paint the repair with the proper pigment. Visit to learn new tricks about various drywall repair projects. Learning how to fix a small hole in drywall is easy, especially if you use the right techniques.
Related Articles -
drywall repair, patching a hole in drywall,
|
