|
Cement rendering is something everybody should know about. This is because you deal with it directly or indirectly. There are some common things which you should know about, because they are a part of daily life. Read on to know some important points about it. With the help of cement rendering, the outside walls of any building can be given a great look and some strength as well. It is one of those old techniques which are used since ages. This also implies that this technique is pretty simple to use and inexpensive. This is in fact, the most important fact. It has to be inexpensive because it is so widely used. The size of the buildings also matter a lot. Another point is that people generally like to spend more on interiors and less amount of money on exteriors of the building. Hence, cement render is a perfect thing. The procedure is also very simple. It goes as follows: A very squeaky layer of sand is mixed with lime and cement. The mixture is then applied to the surface, may it be rocky or made with bricks or stones. Over time, the technology is advancing and now cement rendering in sydney is used in different ways to give a nicer look to the building. It is not only about the looks and appearances of the building, but also about the strength. The mixture of cement, sand and lime makes the exteriors very strong. Such strength is especially important for buildings in extreme weather conditions. Too much of heat, cold, moisture or even rains can spoil the buildings very soon, so, it becomes very important to give the building the shield it requires. There are various kinds of cement renderings available in the market. It includes the traditional method, and then the coloured and acrylic renderings. The coloured rendering is very much similar to traditional method. The only difference is of the colour that is added. This is a better one because it gives a nicer look, which goes according to the colour scheme of the whole building. Surely, it is a little more expensive than traditional one, but the results are different as well! Another kind of rendering is called acrylic rendering which is more advanced than the previous ones mentioned. Acrylic is basically an element which is a mixture of both petrol and plastic polymers. It is better because it gives even more strength than normal cement rendering. Therefore, acrylic render those buildings which are really tall in size and needs great amount of strength. When this rendering is used, the layer is very thin. The measurement is near about 4mm which helps in quick drying and work done in a faster way. It is always better to opt for painting the surface after acrylic rendering, but some people who are low on budget avoid painting and prefer to leave it as it is. Preferable method is of course to get the paint done to provide a layer of protection. You should also make sure that the process of drying is given enough time. If the rendering is not dried properly, then it might create further more problems. Therefore, a little patience is letting the rendering dry up can give you more fruitful results.
Related Articles -
cement render, cement rendering, acrylic render, acrylic rendering, cement rendering in sydney,
|
