|
The maintenance of a hot tub heater is generally not difficult. However, when something goes wrong, it is ideally to have someone with the right equipment and knowledge look into it. In the meantime however, it cannot hurt you knowing a few things regarding hot tub parts so you will not be clueless when talking to the plumber. Any introduction into this topic should start with a recap of the main parts. There are basically three essential components: the jets, the heaters and the pumps. A water pump is the mechanism that together with the motor and the jets pushes the water into the bath tub. The jets are the openings through which the water is spilled into the tub with a constant flow. And the last part remaining is the heater, a system designed to monitor the water temperature and add extra heat whenever necessary. In this way, you get to set what temperature should the water have and it maintains it on the required level. Things should run smooth as long as you follow the recommendations of the manufacturer. But even so, there are times when your beloved hot tub stops functioning. The most common reported problems are a too rapid cycling, chemical imbalances or an air lock. The first malfunction is closely related to the functioning principle of a tub. Because it automatically detects the temperature drops and starts the heating process, it can undergo through tens of cycles a day. This will normally lead to a deterioration of the different hot tub parts, but the hot tub heater is the one that suffers the most. If you rely on this instrument for your own comfort, than chances are you are not overusing it. If, on the other hand, you have the tub placed in a spa where people come and go all the time, it can be a bit of a challenge. Continuing with the previously suggested chemical imbalances, these refer to the natural process of plumbing deterioration. It happens not just to your hot tub, but also to your bath tub, sink, washing machine and so on. The only thing you can do about it would be to use the appropriate clean up solutions that will prevent the process of oxidation or corrosion. You can go to any chemical shop and ask about hot tub maintenance and cleaning products and you will have plenty of options to choose from. Last but not least, the air lock is one of the most dangerous problems that can occur. It refers to any air pocket that accidentally enters the system, and that can gradually alter its functionality. Malfunctions start with overheating and they can lead to sudden interruptions of the water heating process. If you do nothing about it, chances are that the damages will be irreparable. For a better knowledge on how your hot tub heater works, keep reading such informative articles. But never forget that hot tub maintenance and hot tub parts should be the responsibility of a well trained person, not of an amateur.
Related Articles -
hot tub heater, hot tub parts, hot tub maintenance,
|
