The position of aerated concrete block equipment in embryoid bodies in the mold In the aerated concrete block production line equipment, mold is an important equipment of aerated concrete block equipment. Design of the die, should choose the most reasonable security position and parting surface according to the body shape, ensure Autoclave Aerated Concrete block plantforming the blank in the most favourable conditions, and make easy demoulding, simple die structure. Usually, for the rotation of the body, the pressing direction should be consistent with the direction of the axis of. The hole wall is thin, high part of the best forming by the die, because the liquidity powder, composed of an upper die forming is difficult. In addition, the demoulding method must be given full consideration, try to avoid using the hand from a cavity pull out the workpiece, no don't easily broken, broken. If the body has a slope, the big end should be placed on such easy deformation, demoulding Blank in pressing, the pressure not uniform,Autoclaved Aerated Concrete machinery depends largely on the blank in the mold position is reasonable. For example pressing triangle measurement, if the body in the correct direction is placed, the following two vertex powder material by pressure, so the pressure is very close,aac line less pressure on the tip of the powder by, organization is loose. If the direction is reversed, the above angle downwards, this is powder by pressure iAerated Lightweight Brick Machines basically consistent, density is uniform. Concave and convex mould often due to fit more closely, but lack of vent groove, Light Weight Block Machine the powder in the air can not be ruled out, making the product quality is affected, especially in the large cities when pressed
Related Articles -
The, position, of, aerated, concrete, block, equipment, in, embryoid, bodies, in, the, mold,
|