The stirring effect of concrete mixer not only relates to the operation, but also has direct relationship to routine maintenance. The working environment of concrete mixer is severe, for example, the stirrer of the mixer is usually hanging placed and the stirring shaft has a long length, so it suffers large bending moments and torque, causing attrition for bearing because of the partial load it bears. Sometimes due to the gap of the worn bearing, the slurry immerses into the bearing and exacerbates its attrition. In addition, the relative movement between stirrer and materials is tremendous in operating condition, so the materials have on a strong abrasive action to mixer. If the abrasion is uneven, it can cause the imbalance of stirrer. Sometimes because the materials bonding on the stirrer or tank wall fail to be cleaned-up timely, the stirring resistance increases greatly, causing mechanical vibration and noise. The operators and maintenance personnel should maintain and examine the equipment regularly to improve the working condition of pouring stirring and avoid mechanical failure. Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mobile block making machine,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. The concrete mixer should be set at a flat position. Raising the tire with square wooden paving under the front and back axles can avoid walking motion at the launch time. The concrete mixer should be implemented two leakage protection. After power ready on working days, the operator should check the machine carefully. It can be brought into use if the empty test is qualified. Whether the mixing cylinder speed is appropriate should be tested during commissioning. Generally speaking, empty speed is 2 ~ 3 rpm faster than loading condition. If the difference is extraordinary, the ratio between wheel and driving wheel should be adjusted. After power on concrete mixer, always make sure whether all the components of the concrete mixer is functioning properly. When power off, always check whether the concrete mixer blade is bent and whether the screws are knocked or loose.
Related Articles -
concrete batching plant, hzs type concrete mixing station,
|