|
|
 |
|
|
Caused by the improper binding of the publications process scattered posts - binding, book - Printi by li miss
|
|
|
Caused by the improper binding of the publications process scattered posts - binding, book - Printi by LI MISS
|
|
| Article Posted: 01/09/2011 |
| Article Views: 119 |
| Articles Written: 1636 - MORE ARTICLES FROM THIS AUTHOR |
| Word Count: 643 |
| Article Votes: 0 |
|
Caused by the improper binding of the publications process scattered posts - binding, book - Printi |
|
|
|
|
|
Business,Business News,Business Opportunities
|
|
32 Open Color Printing, paper, thick books to be used to produce high-quality hot melt adhesives, and all products should be based on the appropriate grade of paper requires the use of hot melt adhesive, to provide binding process for destructive experiments. In accordance with the rules to ensure that glue temperature, away from the slot, groove depth, paper removed, position sizing, layer compliance. Within 14 hours after the binding force not flip books, to prevent casual posts.
Attention to hot melt temperature resistance and low temperature, unglued due to temperature changes and other phenomena occur. Improper use of hot melt adhesive temperature, the temperature lower than 145 when the impact of permeability and adhesion of glue, prone to scattered posts, fold back the problem. But the plastic temperature is too high, liquidity is good, but easy to carbonization, cracking, adhesive failure Er Shi. Temperature is too high, liquidity strengthened, the adhesive layer can not guarantee the same.
Climate change should be based on controlling the temperature, the manufacturers with the technical parameters within the regulation. To avoid illegal operations, such as replacement of species, not by paper weight using the appropriate level of hot melt adhesive. Not regularly clear plastic bucket in the sediment, so that the heating temperature below standard. Binding of the existing processing conditions can not change, attention to improved methods of operation, as appropriate based on the uplift of the original 1 on the tire height, dipping between the book page of the book back thicker. Such as deepening the cover indentation, easy-to-turn. Prevention is, the penultimate page is not cement, reducing the time the reader could not open due to perfect binding products with the first page after rubbing pressure without cement and scattered posts. Some of the products placed inside front cross-map, inside back cover has graphic, bonding with the core books and another for the coated paper printed with illustrations, sometimes Binding of such products due to set the mouth affected with ink stick Results of quality, easy to fall off the cover. Arrangements in the prepress process and the text inside front page, inside back cover and set aside the last page of text side glue 3 ~ 7mm wide range of perfect binding, cover and book block to ensure a solid bond.
Print Cover use of solvent-based inks, hot melt adhesives are solvent etching ink residue changes, easy to make the cover off, pay attention to ink
Additive Use. For the full text printing Binding Varnish products, due to the presence of varnish glue barrier on the effect of the book posts the bond, Binding posts finished the book easy to produce separation of the book cover and the quality of the core disengagement incidents.
Technology Design , The need to connect the various parts of the book quote about not positioned 1.5mm
Varnish
To ensure that the hot melt adhesive immersed in cement posts each book. Not paying attention when the former working procedure, perfect binding glue temperature increase can only take cover deep indentation, enhance the thickness of the plastic to give up. Binding process not suitable for products such as paper processing lines in a different direction book, spine thick, thick ink layer on the light and color textured, thick paper, some high-class publications, promotional or commercial publication, coating thickness The coated paper, thick spine while the other format is too small, difficult living conditions to meet the perfect binding process, management personnel in undertaking shall make recommendations to customers in time, to perfect binding, etc. after the first sewing process. I am an expert from China Bags Wholesale, usually analyzes all kind of industries situation, such as motorola h300 bluetooth headset , headphone foam.
Related Articles -
motorola h300 bluetooth headset, headphone foam,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
|
|
|
|
| Author Login |
|
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|
