|
When is thinking about getting an RC nitro buggy, one may be thinking about what it is and what it does. A nitro buggy belongs to the class of nitro rc cars. Taking a closer look at all the parts that make up the nitro buggy is as follows: first, the general look of the rc nitro buggy is they come in different scales such as 1/16th, 1/18th and 1/5th. The most popular being the 1/16th and 1/8th scale sizes. The smallest is the 1/16th and measures around 7 to 7.5 inches long, 10 to 10.5 inches wide with a wheel base of 12.25 to 13.25 inches. The largest nitro buggy in the class of nitro rc cars is the 1/5th scale which uses a 2 cycle gas engine to power the car. As mentioned before, the 1/16th and 1/8th are the most popular with size making the big difference between these two classes but do share the same kind of parts. The 1/16th rc nitro buggy derives its power from the very small 0.05 cubic inch nitro engine it posses. The 1/8th scale rc nitro buggy gets its power from the variety of nitro engines available in this class of nitro rc cars carrying from the small 0.18 cubic inch to the large 0.30 cubic inch engines. Using the 0.30 does not guarantee you the fastest speeds on the race track. Note that rc b nitro buggy gets most of its speed from a person’s driving ability.Another factor that influences the speed is how the suspension is tuned tire choice and the weight oil in the differentials. Looking at the different parts of a 1/8th scale nitro buggy; it has three different sections. The first parts are found in the centre section of the chassis, second part is the rear suspension and third part is the front suspension. The description of the parts of centre section of the chassis of nitro rc buggy belonging to the nitro rc cars class is as follows: The rear drive shaft, the front dog bone and, the front and rear disk brakes which use single disk brake for both front and rear. Other rc nitro buggy’s have single rear brake and dual disk front brakes while others have rear dual and front brakes. Most manufacturers of the rc buggies will give the option of changing the brake configuration. Adding or removing brakes is enabled to suit one’s driving experience. The centre bulkhead is an area on the rc nitro buggy where one has the option of modifying it. Most centre bulks are made of rigid plastic. The use of milled aluminum bulkheads reduces torque flex in centre differential. Rc nitro buggy belonging to the class of nitro rc cars has rear differential housing and differential and rear bulk head. This is an area for tuning just like the centre bulk head. To help reduce torque, one can always add milled aluminum differential housings and bulk heads. Changing the spring weight of the rear springs has a huge effect on how the rc nitro buggy is going to perform. RC Toy House is your best place to go for all of your rc needs– from nitro RC cars, to rc helicopters, to RC Cars. Visit http://www.rctoyhouse.com to shop.
Related Articles -
nitro RC cars, rc helicopters, RC Cars,
| 
