|
There are different types of laminating machines that you can use to protect paper sheets. You can laminate IDs, menus printed on paper, or other kinds of documents you want to preserve for longer use. Depending on the type of laminating quality you want and the kind of paper you will laminate, you can use any of the various types of laminators below. The hot laminating machines are the most commonly used in the market. They use temperatures between 220 to 300 degrees Fahrenheit to make the laminating film stick. Laminates produced by this kind of machine are more durable, water resistant and can withstand a lot of wear and tear. Hot lamination is preferred for materials that will not be negatively affected by heat. Hot laminating machines also come in two types. There is the large laminator film type and the pouch type. Large machines are purposely meant for laminating big pieces of paper or several pieces of documents at the same time. To use the hot laminator, the machine is switched on to turn up the heat before the paper is placed on top of the bottom laminating sheet. The top laminating sheet is attached to the roller near the heating device. Once the rolling laminators are activated, the bottom layer moves forward while the top sheet is rolled onto the document. The heat seals the sheets wherever they come in contact which seals the paper inside and between the 2 sheets. The product is a tougher material that is water resistant and protected. A pouch laminating machine can laminate small paper sizes up to letter sized paper. The machine is first switched on and heated up. The documents are placed inside a pouch. Once the machine is hot, the pouch is placed in the pre-heated laminator where it is pulled through heated rollers. Resin is released and melts as the pouch passes through the rollers. The document is sealed as the melted resin hardens. Cold laminators on the other hand are ideal for laminating materials that are sensitive to heat. There are documents and materials that become damaged when exposed to higher temperatures such as carbon copies or documents that use certain ink jet print. The document is placed in the cold laminating machine where the roller presses the laminating sheets together under extreme pressure to make them stick. Before having you documents laminated, make sure that they are resistant to heat. Ask your service provider about the suitable way to laminate your document. Make sure that your laminating service has both hot and cold machines in their shop. Ask their employee to check your document and the paper it uses. They also have to check if the ink you used will not be damaged by heat. Hot laminators are better than other types because of the durability, water resistance and the clarity of the document after laminating. If you want to find laminating services, you can find them on the internet. On the other hand, if you wish to start a laminating business, you can likewise find laminating machines online too. Discover where to find laminators and laminating supplies online. Visit LaminatorWarehouse.com for all your laminating needs.
Related Articles -
laminators,
| 
