Laser etching machines have taken the place of the traditional etching process as it has made the process more productive and convenient. It has become easier to engrave on materials like wood, plastic, metals etc. You get a number of benefits compared to traditional methods of etching . In a laser etching machine a highly concentrated beam of light does the engraving work. As a precise instrument the beam of light carries out the etching work precisely and does not create any wear and tear to the tools and materials. This means as an etcher you can reduce the chances of damage to the products or its deformations. This way you can also reduce any toxic by products of some other procedure as well. Laser etching machines work much faster than regular etching procedure and you get clean, permanent and high resolution etching work on projects. There are no limitations on materials as well. The machine is able to cut through thick and thin materials with equal ease. Older engraving systems were large to use and complicated to maintain. Newer Laser etching machines are more effective, easy to learn and operate. The older etching systems needed a lot of safety norms and regulations to be observed and there was a requirement of changing gasses frequently, the newer Laser etching machines do not require those as much. In the PC driven procedure, the inscribing device is connected to the PC to the printing device with a similar cable. The Laser etching machine software on it is then installed into the PC. The procedure is no different from adding a printing device to the PC. Thereafter the art work is generated in design on the PC and examined using a reader and cleaning is done as required. The makers of the inscribing devices can assist the suitable PC with it and procedure. These machines are used for cutting, engraving, etching and marking work in an industrial environment. The marking procedures are used where markings are needed to be done without the use of inks or the use of tools that might wear out the work surface. This advantage provided by Laser etching machines the edge over regular marking technologies where bit heads need to be replaced frequently. Material that can be etched can be natural materials, plastics, metals, stones and glass. You can burn images on any kind of wood. In fact it was one of the first uses of lasers. The laser used for these processes is about 10 Watts or less. Hardwoods provides the best results in etching. Softwoods need to be engraved very carefully. This is because softwood could ignite easily. Other than wood natural substances like latex and rubber can also be engraved. Standard cast acrylic plastic, acrylic plastic sheet, and other resin casts generally get lased very easily. A commonly etched award is a throw polymer shape designed to be lased from the back side. Other than this Laser etching machines are used on a number of other materials.
Related Articles -
Laser Engraving, Laser Marking Services, Laser Marking Stainless Steel, Laser Marking Equipment,
|