|
|
 |
|
|
Triple-deck Shale Shaker, Mobile Processing Trucks Push Solids Handle Capacity, Efficiency by zimeng wang
|
|
|
Triple-deck Shale Shaker, Mobile Processing Trucks Push Solids Handle Capacity, Efficiency by ZIMENG WANG
|
|
| Article Posted: 04/10/2013 |
| Article Views: 71 |
| Articles Written: 127 - MORE ARTICLES FROM THIS AUTHOR |
| Word Count: 2042 |
| Article Votes: 0 |
|
Triple-deck Shale Shaker, Mobile Processing Trucks Push Solids Handle Capacity, Efficiency |
|
|
|
|
|
Blogs
|
|
|
drilling mud cleaning systems into the mud to plate out for the a lot of fractures along the sides regarding the wellbore, he explained.In this case, we do not want the shale shakers to eliminate these solids, we need to save them, which in the end reduces the price, he continued. The triple-deck shaker is capable regarding selectively removing those solids, one thing we have not been capable to perform in the past. We take away these designer solids and also then put them back into the shale shaker manufacturers. We put the mud over a particularly fine shaker screen and also take away as significantly relating to the low-gravity solids as we are able to. The mud is then place via a centrifuge, where it truly is cleaned.The entire process of selectively removing solids is progressively getting employed for underbalanced drilling, Mr. Pierce continued. We de-weight the mud having a strong that is certainly much less dense than water but gives some viscosity. But we do not want that removed either. It is a matter relating to putting anything into the mud that we want to hold in the derrick shale shaker, coupled with then removing it using a shale shaker in such a way that we can capture it place it back into the mud.The industry also has created a brand new cuttings disposal approach for zero-discharge offshore locations. The mechanism uses good stress pneumatics that blow the cuttings into a storage area together with then onto a boat, which then transports the cuttings to an onshore disposal facility. The program is employed in location associated with the skip ship approach, exactly where cuttings are placed inside a mud cleaner around the rig and additionally moved by a crane till they are loaded onto a boat for transport.The new method saves time is a lot safer because it eliminates handling actions and additionally the use of the crane, which is one of the most significant causes relating to accidents within the sector, Mr. Pierce mentioned.At the same time, there may be a push to create ways about treating cuttings on the rig, to attain an oil retention rate that will allow the cuttings to be discharged rather than transported, which can be costly. A device known as a hammer mill removes oil using heat generated by friction, Mr. Pierce said. Existing use of the hammer mill is restricted simply because it takes up space around the rig and additionally includes a gas liquid separator for only 4 to 5 tons per hour. ">We now possess a triple-deck shale shaker, referred to as a Multi-Sizer, which is capable of handling considerably higher flow volumes inside a smaller area. It makes it possible for us to capture far more solids coupled with deal with a lot more mud inside a smaller footprint. E . g ., rather regarding having 6 or shale shaker for sale, we've got three or 4 about this new style that may do precisely the same job.With the boost in underbalanced drilling plus long, horizontal wells and also tight gas formations needing greater stabilization, operators also are taking a look at what Mr. Pierce referred to as designer solids, in conjunction with a tension cage, to stabilize the wellbore. We in fact put a certain size about drilling mud cleaning systems into the mud to plate out for the a lot of fractures along the sides regarding the wellbore, he explained.In this case, we do not want the shale shakers to eliminate these solids, we need to save them, which in the end reduces the price, he continued. The triple-deck shaker is capable regarding selectively removing those solids, one thing we have not been capable to perform in the past. We take away these designer solids and also then put them back into the shale shaker manufacturers. We put the mud over a particularly fine shaker screen and also take away as significantly relating to the low-gravity solids as we are able to. The mud is then place via a centrifuge, where it truly is cleaned.The entire process of selectively removing solids is progressively getting employed for underbalanced drilling, Mr. Pierce continued. We de-weight the mud having a strong that is certainly much less dense than water but gives some viscosity. But we do not want that removed either. It is a matter relating to putting anything into the mud that we want to hold in the derrick shale shaker, coupled with then removing it using a shale shaker in such a way that we can capture it place it back into the mud.The industry also has created a brand new cuttings disposal approach for zero-discharge offshore locations. The mechanism uses good stress pneumatics that blow the cuttings into a storage area together with then onto a boat, which then transports the cuttings to an onshore disposal facility. The program is employed in location associated with the skip ship approach, exactly where cuttings are placed inside a mud cleaner around the rig and additionally moved by a crane till they are loaded onto a boat for transport.The new method saves time is a lot safer because it eliminates handling actions and additionally the use of the crane, which is one of the most significant causes relating to accidents within the sector, Mr. Pierce mentioned.At the same time, there may be a push to create ways about treating cuttings on the rig, to attain an oil retention rate that will allow the cuttings to be discharged rather than transported, which can be costly. A device known as a hammer mill removes oil using heat generated by friction, Mr. Pierce said. Existing use of the hammer mill is restricted simply because it takes up space around the rig and additionally includes a gas liquid separator for only 4 to 5 tons per hour. ">shale shaker for sale, we've got three or 4 about this new style that may do precisely the same job.With the boost in underbalanced drilling plus long, horizontal wells and also tight gas formations needing greater stabilization, operators also are taking a look at what Mr. Pierce referred to as designer solids, in conjunction with a tension cage, to stabilize the wellbore. We in fact put a certain size about drilling mud cleaning systems into the mud to plate out for the a lot of fractures along the sides regarding the wellbore, he explained.In this case, we do not want the shale shakers to eliminate these solids, we need to save them, which in the end reduces the price, he continued. The triple-deck shaker is capable regarding selectively removing those solids, one thing we have not been capable to perform in the past. We take away these designer solids and also then put them back into the shale shaker manufacturers. We put the mud over a particularly fine shaker screen and also take away as significantly relating to the low-gravity solids as we are able to. The mud is then place via a centrifuge, where it truly is cleaned.The entire process of selectively removing solids is progressively getting employed for underbalanced drilling, Mr. Pierce continued. We de-weight the mud having a strong that is certainly much less dense than water but gives some viscosity. But we do not want that removed either. It is a matter relating to putting anything into the mud that we want to hold in the derrick shale shaker, coupled with then removing it using a shale shaker in such a way that we can capture it place it back into the mud.The industry also has created a brand new cuttings disposal approach for zero-discharge offshore locations. The mechanism uses good stress pneumatics that blow the cuttings into a storage area together with then onto a boat, which then transports the cuttings to an onshore disposal facility. The program is employed in location associated with the skip ship approach, exactly where cuttings are placed inside a mud cleaner around the rig and additionally moved by a crane till they are loaded onto a boat for transport.The new method saves time is a lot safer because it eliminates handling actions and additionally the use of the crane, which is one of the most significant causes relating to accidents within the sector, Mr. Pierce mentioned.At the same time, there may be a push to create ways about treating cuttings on the rig, to attain an oil retention rate that will allow the cuttings to be discharged rather than transported, which can be costly. A device known as a hammer mill removes oil using heat generated by friction, Mr. Pierce said. Existing use of the hammer mill is restricted simply because it takes up space around the rig and additionally includes a gas liquid separator for only 4 to 5 tons per hour. ">We now possess a triple-deck shale shaker, referred to as a Multi-Sizer, which is capable of handling considerably higher flow volumes inside a smaller area. It makes it possible for us to capture far more solids coupled with deal with a lot more mud inside a smaller footprint. E . g ., rather regarding having 6 or shale shaker for sale, we've got three or 4 about this new style that may do precisely the same job.With the boost in underbalanced drilling plus long, horizontal wells and also tight gas formations needing greater stabilization, operators also are taking a look at what Mr. Pierce referred to as designer solids, in conjunction with a tension cage, to stabilize the wellbore. We in fact put a certain size about drilling mud cleaning systems into the mud to plate out for the a lot of fractures along the sides regarding the wellbore, he explained.In this case, we do not want the shale shakers to eliminate these solids, we need to save them, which in the end reduces the price, he continued. The triple-deck shaker is capable regarding selectively removing those solids, one thing we have not been capable to perform in the past. We take away these designer solids and also then put them back into the shale shaker manufacturers. We put the mud over a particularly fine shaker screen and also take away as significantly relating to the low-gravity solids as we are able to. The mud is then place via a centrifuge, where it truly is cleaned.The entire process of selectively removing solids is progressively getting employed for underbalanced drilling, Mr. Pierce continued. We de-weight the mud having a strong that is certainly much less dense than water but gives some viscosity. But we do not want that removed either. It is a matter relating to putting anything into the mud that we want to hold in the derrick shale shaker, coupled with then removing it using a shale shaker in such a way that we can capture it place it back into the mud.The industry also has created a brand new cuttings disposal approach for zero-discharge offshore locations. The mechanism uses good stress pneumatics that blow the cuttings into a storage area together with then onto a boat, which then transports the cuttings to an onshore disposal facility. The program is employed in location associated with the skip ship approach, exactly where cuttings are placed inside a mud cleaner around the rig and additionally moved by a crane till they are loaded onto a boat for transport.The new method saves time is a lot safer because it eliminates handling actions and additionally the use of the crane, which is one of the most significant causes relating to accidents within the sector, Mr. Pierce mentioned.At the same time, there may be a push to create ways about treating cuttings on the rig, to attain an oil retention rate that will allow the cuttings to be discharged rather than transported, which can be costly. A device known as a hammer mill removes oil using heat generated by friction, Mr. Pierce said. Existing use of the hammer mill is restricted simply because it takes up space around the rig and additionally includes a gas liquid separator for only 4 to 5 tons per hour.
Related Articles -
shale, shaker, manufacturers,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
|
|
|
|
| Author Login |
|
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|
