|
Products of Ducom Ducom is a company that provides different test instruments used in different aspects. It contains the international ranges of tribometer. They are leading leaders with many installations of these instruments in thousands of labs. This company has supplies many different products. There are number of application products supplied by this company. Some of them are: Abrasive products with two or three bodies: Pin or ball on disk tribometers: different model are available under this section namely, ED201, TR210, TR20, TR20 EV, TR20 LT, TR208. These are commonly used for measuring friction and to maintain friction. The geometry of it is commonly a contact between pin and disk and few are contact between ball and disk, and flat on disk except ED201 model. Two body abrasion tester: these are commonly used for abrasion wear test on the sample while promoting the product to next state of a cycle. The test are conducted on these parameters Load Number of cycles Abrasion grade Materials Abrasive testers: this is used to check the materials abrasive resistance to abrasive dry state. Fretting wear tests: these are used to characterize the bidirectional friction in sliding motion. Specification for this: Stroke Frequency Test load Temperature Multi-specimen tester: this is a kind of tester used to check the friction in sliding that is contact with various geometries. The parameters considered according to its specification are: Normal load Frictional torque Shaft speed Wear micron Test duration Stage temperature The different areas where these above mentioned are used: Bio-implants, construction material, mining machinery, agricultural machinery, materials and coating, automotive. Fuel and lubrications: Four ball tribometer: the product named TR30 L to prevent wear, high pressure, and high friction and fatigue lubricants. OK load tribometer: TR32 is the code of the product. This is used to correct the properties of high pressure. Lubricating load bearing capacity tribometer: TR352 is used for checking the lubricants and cutting oils to prevent wear and tear of machines. Pin on vee block tribometer: TR22 is used to evaluate the properties of load carring and wear prevention. Tapping torque tribometer: TR701 is used to increase the efficiency of cutting metals works. Shear stability tribometer: TR294 control the shear stability of polymer. Low temperature torque tribometer: TR501 used to check the breakage of grease at sub zero temperature. High temperature Grease tribometer: TR551 is used to supply the adequate amount of lubrication for long period. High frequency reciprocating tribometer: TR282 series evaluate the characteristics of friction and wear. Reciprocating friction monitor: TR 283 these are seen in automotive applications. Roller on roller tribometer: TR25 it’s a tool to research on friction. Multi-specimen tribometer: TR705 works good on different geometric contacts. These products are used in additives, lubricants, cutting fluids, automotive, fuel lubricants, and aviation lubricants. These are the different products based on their applications are supplied and installed where in the areas where they are needed. These products are very good in quality wise and are known for its reliability. Ducom team has worked hard for providing the necessary products for their customer to make their work run smoothly in their labs. For more information on Products of Ducom you can visit http://www.ducom.com/
Related Articles -
Products of Ducom, Ducom products,
| 
