|
To offset the expense of buying cut paving stones, many homeowners choose natural stone paving for outdoor surfaces like driveways, paths and patios. You may purchase natural garden stone paving, or gather your materials from around your property and creek beds. In addition to its cost efficiency, natural stone paving provides an earthy feel to your outdoor landscaping and enhances the looks of any type of home and home siding. Instructions as follows: Firstly, choose what you want to lay with the natural stone paving. Mark off the area with wooden stakes and string. For a pathway you should mark the curves and corners of the path by placing stakes every 3 feet apart, while for patios and driveways you can simply place one stake in each corner and attach strings to further outline the chosen site. Secondly, remove the sod and soil from the paving stone site, displacing a 6-inch depth of soil. Use a spade or shovel to remove the soil and sod and place it in a wheelbarrow to cart away as desired. Thirdly, compact the soil in the excavated area with a soil tamper. Go over the area a minimum of three times, pounding the flat end of the soil tamper against the soil. After compacting, check the site with a level and remove additional soil from high areas and tamp those flower pots again until you have a completely level surface for your paving project. If you have a sloped yard and want to build a natural stone pathway, you do not need a level surface, though you will still need to compact the soil in the area. Fourthly, place a 3-inch layer of sand gravel into the site and compact the gravel with the soil tamper. Tamp each section of the gravel a minimum of three times before proceeding. Fifthly, cover the gravel layer with a 2-inch layer of masonry sand. The sand will filter down into the gravel layer slightly. Smooth the sand down with the back of the spade or shovel. Sixthly, mix a batch of ready-mix mortar inside the emptied wheelbarrow. Apply water and stir the mixture until the mortar reaches a consistency similar to brownie batter. Seventhly, apply mortar in a 1-inch layer across the top of the masonry sand with a concrete or mortar trowel. Spread cement slurry across the bottom of each natural stone and set it into place on the mortar. The slurry promotes a stronger bond between the stones and the mortar. Eighthly, tap the stones into place with a rubber mallet to keep the surface of the pavement as close to level as possible. Ninthly, apply additional mortar into the joints between stones and smooth the joints with a jointer tool. Tenthly, continue to set the stones and smooth the joints until you complete your entire paving project. Avoid walking or placing items on the paved area until the site has a full 24 hours to dry and harden. Tips & Warnings If you collect natural stones from your property, search for mostly wide, flat stones of an approximate thickness. In a word, as a professional business E-platform of promoting stone industry, we are in possession of a powerful technology group and high-efficiency operations management system. If you are interested in us and want to consult us freely, you can also see slate countertop or become a loyal follower of us by @ https://twitter.com/stonebtb.
Related Articles -
garden stone, paving stone,
|
