|
A stainless ball valve is a basic fitting may be attached to the end or at the juncture of a pipe. It regulates the flow of liquid gas. These valves are used in numerous applications and are used very commonly in various industries. The inexpensive simple plastic versions are generally manufactured for different residential uses while the heavy-duty, high-precision valves are used in factories. In some cases, these valves are several feet wide and could be made with a combination of materials and may be very expensive as well. These are considered to be specialty equipment and you will find them only in specialty stores. A stainless ball valve has a specific construction and also has very specific uses. It is usually made of a smooth metallic or plastic ball. This ball is encased in a cavity. The ball is surrounded by a ring-shaped seal and is attached to the exit and entry ports of the connecting valve. The open port of the ball valve is called a core and it runs right across the steel ball. A handle is connected to the sealed valve stem-shaft. Once the valve has been switched-off, the port is perpendicular to the actual pipeline which holds the valve. This movement completely blocks the flow of the liquid or gas that is flowing through the pipe. In applications where the chemical reaction can affect the plumbing, stainless steel fittings are the preferred choice. Petroleum, chemical and fertilizer manufacturing units always make use of steel pipes and steel quick couplings. They are perfectly suited to high-pressure applications and are anti-corrosive as well. There are numerous reasons why steel is a better alternative to iron fittings. It is easier to maintain cleanliness and the pipes and couplings do not rust. This is important in the food industry or even in milk processing units as using iron pipes and fittings can contaminate the food or drink. In addition to this, steel is also resistant to many industrial mixtures, chemicals as well as solutions. It is rigid, strong, long-lasting and retains its sheen for a very long time. Most couplings will have threading at either end. The reducing bush couplings that regulate the flow of liquid also have threaded ends. However, there are many industries that have specific equipment requirements. In this case, they can choose to order the fittings and have them made to their specifications. On the other had they can just acquire the basic pipes and couplings and thread them on the production site. It is possible to join two pipe lengths with quick couplings of different kinds. The diameter of the straight fittings is wider than that of the pipes that are connected by them. Angled fittings are available in various types as well and it is possible to mix-and-match to create the maze of pipes that many industries need. The couplings are manufactured to the same quality parameters as that of the pipes. This is important as some industries operate in extreme temperatures, either hot or cold. Inferior quality material can lead to warping and cracking which will damage the rest of the equipment. Resource box: King Fittings can supply you with quick couplings as well as any stainless ball valve you need. These fittings are made to the highest quality standard.
Related Articles -
quick couplings, stainless ball valve,
| 
