For the success of any scientific experiment it’s very much important to manage the laboratory glassware equipments properly and clean them thoroughly. Lab equipments like the test tubes, beakers, flasks, holding chemical beakers and other glassware should be properly maintained, washed and cleaned after and before completion of the experiment. The glassware used in the experiments should be free of any type of contamination. Proper care of the lab glassware is also essential and required for performing the experiment properly and getting accurate results for any experiment. The most important step for ensuring the laboratory glassware equipments are clean is to risen them with de-ionized water. Pure distilled water should be use to clean any type of chemistry lab equipments and this is important because the water is free of any electric charge and has a neutral pH. If the distilled water is not used for the cleaning purpose than the pH of the solution will be altered and this will give errors in the experiments and further the calculations. After rinsing the equipments with the help of water, they should be leave or wipe with a clean towel to remove any extra amount of water. The scientific laboratory glassware equipments are often broken because they are mishandled by the students or the research scholars. Many types of equipment develop cracks or have chemical films. Thus special training should be given to use these equipments. Students or scholars should be taught to handle this glassware and avoid any kind of breakage. Some labs have strong acids and base use in their experiments and many students even get burn due to mishandling of these agents. Thus dangerous compounds should not be exposed to skin or any other organ and students should handle them with care by wearing special gloves. Storage and maintenance of the glassware is also important and this can be easily taught by the lab teacher. When the glassware’s are not in use, they should be separately kept in a closed cabinet and should be handled with care. They should be cleaned and washed before and after the experiments, this should be followed every time and should be done on a routine basis. Doing experiments and getting result is a tough job but doing them with proper care and managing all the equipments in a right way is even tougher. All the students should thus first taught to handle laboratory glassware available in the labs before conducting any experiments. The handling of the laboratory glassware equipments should be done with special care. Laboratory glassware equipment should be clean and washed routinely before and after conducting the experiments.
Related Articles -
Laboratory, Glassware, equipments,
|