Cisco IOS® Software is the world's leading network infrastructure software, GLC-SX-MM delivering a seamless integration of technology innovation, business-critical services, and hardware platform support. Currently operating on millions of active systems, ranging from the small home office router to the core systems of the world's largest service provider networks, Cisco IOS Software is the most widely leveraged network infrastructure software in the world. Updating the IOS on a Cisco 2960 is a straightforward procedure when connected to the Cisco 2960 command line interface (CLI) using a serial console cable. Things You’ll Need: Microsoft Windows 7 computer with 9 pin serial port, TFTP service installed, and connected to the same network as the Cisco 2960 Microsoft HyperTerminal install on the Windows 7 computer Cisco serial console cable Cisco IOS image stored in the root directory of the TFTP service application IP address of the Microsoft Windows 7 computer Privilege Exec mode password for the Cisco Catalyst 2960 switch Instructions to Upgrade a Cisco 2960 IOS With a Console Cable 1. Attach one end of the Cisco serial console cable to the 9-pin serial port on the Windows 7 computer. Attach the other end of the Cisco serial console cable to the Cisco 2960 serial console port. 2. Select the “Globe” start button on the Windows 7 computer, then select “Computer” and then navigate to the location where the Hyperterminal application files are stored. Double-click on the “hypertrm.exe” file. The “HyperTerminal” program will appears. 3. Enter a name for the connection in the “Name:” field presented in the Hyperterminal window that appears, and then tap the “Enter” key. Select “Connect using:” and then choose the “Com port” in the drop down list, that is being used to connect the Windows 7 computer to the Cisco 2960, and then tap the “Enter” key. 4. Select the “Bits per second:” drop-down box, and then choose the “9600? setting from the list that appears. Select the “Flow Control” drop down menu, and choose the “None” setting in the list that appears. Tap the “Enter” key. 5. Touch the “Enter” key and the Cisco command line interface (CLI) appears. 6. Enter the “enable” command at the command prompt, and tap the “Enter” key. Enter the Privileged Exec password when requested, and then tap the “Enter” key. 7. Enter “archive download-sw /overwrite /reload tftp:// IOS-file-name.tar” on the command prompt, substituting the “IOS-file-name.tar ” with the actual name of the IOS update image file that is stored in the root directory of the TFTP service on the Windows 7 computer. Tap the “Enter” key to execute the command.. The new IOS image copies to the Cisco 2960. After the IOS image file has been transferred to the Cisco 2960, GLC-LH-SM the switch automatically reboots and starts running the new IOS image. Catalyst 2960 and 2960-S switches are the leading fixed-configuration Layer 2 edge access switches, 2960 is FE access switch while 2960-S most ports are GE. The Catalyst 2960-S Series Switches are stackable switches and support POE+ function. 3Anetwork.com keeps stock for most 2960 and 2960-S LAN base switches. Among all Cisco Catalyst 2960 switches, WS-C2960-24TT-L and WS-C2960-24TC-L are best selling models. Among all Cisco Catalyst 2960S switches, WS-C2960S-24TS-L and WS-C2960S-48TS-L are best selling models. 3Anetwork.com offers best Cisco 2960 Price, Cisco 2960S (2960-S) Price, ship to worldwide.
Related Articles -
Cisco, 2960,
|