The wiConnect is an innovative series of radio modem solutions that allows users to create a remote wireless infrastructure, not to mention monitor and control the remote devices of their network with extreme ease. wiConnect radio modems are a part of a wider collection of devices named wiConnect Constellation. The purpose of wiConnect Constellation is to transform device installations into an iper-connected and reliable wireless system. Matching applications needs for various industries and segments, this ecosystem promises to revolutionize the reference market. The wiConnect RM Evaluation Kit is a test tool used to configure, test and connect to the wiConnect radio modems based networks a laptop or PC. The Evaluation Kit includes two wiConnect RM-USB Lite devices, two wipe antennas and their relative coaxial micro RF cables, plus a software tool that allows users complete their RF configuration and perform testing campaigns. In fact, the wiConnect RM Evaluation kit has a user friendly interface that allows users at defining and perform tests with different RF parameters and compare performances of different locations of the RX and TX devices with graphs. The main features that can be set with this tool are as following: antenna diversity given by the double RF lines, programmable bandwidth, RF TX power, frequency and data rate, various modulations. |
The wiConnect EV-KIT is a complete test tool designed to test wiConnect Radio Modems specifically. The aim of this software is to help users to configure and implement tests of superior quality with complete graphs and statistics reports. Each testing campaign realized with this impressive tool can be stored in the database under different names and can be accessed and repeated whenever the users wish. The statistic tool has the purpose of tracking the RSSI level and the difference between received data packets. Users can perform different tests on the RF power and RF settings, type and length of the data load, not to mention the mutual position of the radio modems. The wiConnect Test Software Tool also comes with the wiConnect RM Evaluation kit user manual and an interesting feature that allows users to perform tests with automatic repetition. This type of test is completed on all RF powers and its purpose is to distinguish which is the minimal satisfying power for a specific radio link. The statistical database keep tracks of all these radio parameters and the test results such as the average, max and min signal strength (RSSI) for each transmitting power, the ratio of lost packets and the name and notes of each specific test.
In order to use this software tool, users are required to have two wiConnect RM-USB Lite, two PCs with Microsoft Windows installed on them and the Silabs CP2105 USB drivers, provided with the evaluation kit even if most of times automatically downloaded and installed by Windows. Each of the two wiConnect RM LITE USB devices has to be connected to one of the used computers. If users wish to test the wiConnect modems and aim to verify their performance in different mutual positions of a given environment, it is advisable for the second wiConnect RM-USB Lite device to be plugged to a mobile device as for instance a laptop. Users need to install the software and the drivers for the USB IC. Users should find and launch the exe file specific for their system. They can also download the wiConnect EV-KIT exe files from the manufacturer official web site. Tests are only possible when the two modems involved are configured correctly. Without the same RF configuration and power, the two modems will not communicate properly, so users are urged to enter the Configuration panel and change the UART and RF setting accordingly.
To find out more about wiConnect RM Evaluation kit and wiConnect RM Evaluation kit user manual, please visit this website.
Related Articles -
wiConnect RM Evaluation kit, wiConnect RM Evaluation kit user manual,