|
Description of the high-pressure die casting process After proper bedding the mould onto the die casting machine, the mould has to be brought to higher temperature slowly and careful by internal heating. When heated up it will get a tender lubrication treatment on privileged components for a smooth casting release later on. The male part of the mould is now maneuvered into the female part and locked tide. A perfect sized plunger injects with precise movements the high quality liquid for best produce into the unfilled empty space. When fulfilled the plunger exerts a last intense squeeze before the pressures release. After a short wait time of about 9 seconds the mould opens wide and the creation is pushed out painstaking. A carrying system will place it aside for cleaning and visual checks by professional personal. If necessary equipment for more detailed examination as weighting, measuring or x-rays would be available. If the product passes all the checks it is ready for delivery. The process can be repeated as often as requested. For further information and assistance please feel free and contact the specialist of your choice. For example: Regloplas Corporation, MI, USA www.regloplasusa.com - Temperature Control Visi-Trak Corporation, OH, USA, www.visi-trak.com - Precision Velocity & Pressure Control ... Are you in control? Chem-Trend, MI, USA, www.chemtrend.com - Power-Lube® plunger lubricants Dr Diecast, MI, USA, www.drdiecast.com - Practical help at your location ... I am "hands on" when it comes to solving problems and training Climax Research, MI, USA, www.climaxresearch.com - Service for special assistance like life-prediction methodology, strength, stress, fatigue MAGMA Foundry Technologies, Inc IL, USA, www.magmasoft.com - Consulting and simulations to get the best out of the process
Related Articles -
die casting, ralf kind, magmasoft, simulation, process,
| 
