Whether a doorknob hit the wall with too much force or you’re switching out fixtures, if there is a hole in your sheetrock, it needs to be repaired as soon as possible. Luckily, small holes in your sheetrock are easy to patch. In most cases, you can repair sheetrock in Smyrna and make it appear seamless against your wall. Here are a few tips to get you started: - Find a scrap of drywall. Before you start patching, find a spare piece of drywall or pick one up at the convenience store. Then, cut out a square piece that is large enough to cover the damaged part of your wall. Then, place the patch over the hole on the wall and trace around it.
- Use a drywall saw. Once you have the shape traced, use a drywall saw to cut an ‘x’ shape inside of the square. Then, use a utility knife to cut along the outside lines of the square. You should then be able to easily remove each piece of the damaged wall.
- Use strapping. Use a 1x3 piece of wood that is about 6 inches longer than the hole you’re repairing. Apply adhesive along the front of the strapping. Then, insert the strapping into the hole and apply it firmly against the damaged drywall. Then, drive 2 screws in a staggered pattern to both ends of the drywall and strapping.
- Attach the patch and seal. Once the strapping is in place, simply attach the patch that you have cut out to the hole, use screws to secure it, and then seal it using drywall tape or mud. Let it dry completely before using texture or paint to make it blend with your wall.
If you have any questions about how to repair sheetrock in Smyrna, it’s best to leave it to the professionals. Hiring a contractor to repair the holes in your wall is a great way to ensure that the job is done right.
Related Articles -
repair, sheetrock, smyrna,
|