|
The carved patterns, with brilliant atmosphere, classical elegance, always attract us, stop and savor. It is the artistic beauty of Chinese architecture. Since ancient times, there has been a saying that "every moment is not a house, and every moment is precious". Today, the editor of the Aluminum Veneer manufacturer talks about the "carved Aluminum Veneer" with the beauty of Chinese architectural art. Carved aluminum veneer gives more artistic sense to the building Advantages of carved aluminum veneer Through the various pattern changes and matching of the board surface, the simple aluminum board material surface produces a sense of visual movement, which is suitable for various environments, and satisfies the designer's unconstrained, bold innovation and endless thinking space. The perforated aluminum veneer is light in weight, strong in strength, and corrosion resistant; the silver texture is beautiful and generous, easy to clean and maintain; it has high value retention, can be recycled and reused, and is environmentally friendly; it is convenient and quick to install and construct. As a kind of carving art, through cleverly applied to modern architectural decoration, it brings stylish, beautiful, and individual artistic decoration to our lives. Production process of carved aluminum veneer The engraving knife of conventional metal engraving machine is as small as 8mm, so when designing patterns, the pattern gap should not be less than 10mm. For engraved boards with gaps less than 8mm or high engraving requirements, laser engraving is required. The carved panels used for partition or curtain wall modeling generally use aluminum plates with a thickness of 2.0mm/.5mm/3.0mm and above as raw materials, so that the flatness of the carved panels can be well verified. For decorative carved curtain walls and suspended ceilings, thinner materials such as 1.0mm / 1.2mm/ 1.5mm can be selected. The price of carved aluminum veneer is generally measured according to the complexity of the carved pattern and the hollow area. The pattern is complicated and fine, and the hollow area is small, the higher the price; the simpler the pattern, the larger the hollow area, the relatively cheaper price. Perforated aluminum veneer is used for environmental protection noise control barriers in highways, railways, subways and other transportation and municipal facilities that pass through urban areas, and for sound insulation and noise reduction of building walls, generator rooms, factory buildings, and other noise sources Sound-absorbing panels can be used as sound-absorbing materials for ceilings and wall panels of buildings; they can be used as fine decorative orifice panels for building stairs, balconies, and environmental protection tables and chairs. After the carved board is carved, it can be made into different shapes and surface treatments according to customer requirements. It can be made into columnar arc hollow boards, wave-shaped ceiling-shaped hollow aluminum ceilings, bending at any angle, etc.; surface treatment is conventional indoor dusting, polyester Baking paint, wood grain transfer, wire drawing matte, enamel treatment, outdoor fluorocarbon spraying, etc. Application of carved aluminum veneer aluminum wall panels is a new type of curtain wall decoration material, which has a wide range of uses. It can be used in curtain walls, door heads, pillars, billboards, partitions, screens and other places. The fancy patterns can be customized, and ethnic patterns can be selected. You can also choose modern European patterns to meet various decorative needs. The appearance of the carved aluminum veneer can be visually felt its variable special texture and elegant color. It is unattainable by other exterior wall panels.
Related Articles -
Carved, aluminum, veneer,
|
